Desiccant dryer

time:2016-07-07 22:47 click: 次

dewpoint -700C ~-780C

temperature accuracy +/-0.1 0C

Standard technical characteristics:

Use of Simens PLC control, drying temperature using the world's most advanced fuzzy theory and PID control at the same time, temperature control precision and very precise. With sound and light alarm, week / day aging control and detailed machine running state query function.

Adopt the SIMENS vacuum pump, as well as the world's top brand electrical components, good stability, long service life.

] built for dehumidification and regeneration of stainless steel heating chamber is equipped with a fully insulated armored resistance; high lift, low noise side channel wind machine.

] return air cooling with stainless steel air / air heat exchanger, or the wind / water copper tube and aluminum fins (depending on different types of).

The insulation barrel adopts the patent structure, compared with the traditional barrel, with the drying time

Short, dry is very uniform, even if the raw material is only about 20% of full load

Can also guarantee the ideal drying effect and so on.

Optional accessories:

The safety of electronic thermometer

Anti clogging pressure switch - filter. When the pressure drop value of the filter is higher than the set value, the alarm is sent out, so as to ensure the optimum air flow rate and maintain the best drying performance. Dew point meter control. Figure shows the actual dew point value of dry air, but also to control the molecular sieve Twin Towers switch, reducing the switching cycle to improve the life of the molecular sieve.

Desiccant dryer scene photos

Inside control box

上一篇：没有了下一篇：Large scale desiccant dryer